Industrial Greases

LITHON RR 3 (S)/ RR 3 (T)/RR 3 (G) SERIES

LITHON RR 3 (S)/ RR 3 (T)/RR 3 (G) SERIES

INDUSTRIAL GREASES

Meets specifications :

LITHON RR 3 S meet IS:7623-1993 Grade EP 3 Type. Meets TATA MOTORS requirement of EP Type grease

Application areas :

LITHON RR 3 S has, in addition, shear stability, high load carrying capacity and is recommended for situations requiring the use of an extreme pressure multipurpose grease. LITHON RR 3 S is also suitable for ball and roller bearings requiring NLGI Grade 3 grease with EP properties.

Performance benefits :

  • Excellent water resistance properties.
  • Works most satisfactorily even at high loads, wet and dry situations
  • Excellent mechanical and oxidation stability

Special Features

LITHON RR series of lubricants are first quality, lithium soap greases suitable for lubricating various types of mechanical equipments. These are superior multipurpose greases, developed to meet the varied requirements of bearing manufacturers. They are water-resistant and are corrosion inhibited with excellent oxidation and mechanical stability.

Physico-chemical properties

  LITHON RR 3 (S)/ RR 3 (T)/RR 3 (G) SERIES
Cons Worked 100000X 250
Cons Worked 60X 240
Dropping Point, ºC >180
Four Ball Weld Load, kg 280.0
Wheel Bearing Deposit FFD
Wb Leakage, g 3
  LITHON RR 3 B
Appearance Smooth And Homogenous
Colour Amber To Light Brown

Consistency Of The Grease

@ 25± 0.5 ºC, 0.1 mm Units

Worked, 60 X

Worked, 1,00,000 X

± 15 Of 60X

220-240

 

± 30 Of 60X

Corrosion, Copper Strip, @ 100ºC For 24 Hours No Evidence Of Discoloration Etching Or Corrosion
Dropping Point, ºC 180
Foreign Matter Nil
Free Alkalinity, As LIOH, %Wt 0.20
Free Organic Acidity, As Oleic Acid 0.30
Heat Stability, @ 100ºC, 30 Hrs, Loss % Wt 5.0
Resistance To Water Washout @ 80ºC, Percent Loss By Wt 5.0

Roll Stability % Change In Penetration

A) After 2 Hrs Rolling

B) After 16 Hrs Rolling @ 50ºC

 

10

15

Oxidation Stability, @ 100ºC Drop In Pressure, psi 10

Mineral Oil Component Charged:

Flash Point, (COC)ºC, Min

Kinematic Viscosity @ 100ºC, cSt

Kinematic Viscosity @ 40ºC, cSt

Viscosity Index, min

 

               200  

               10                                                  12

               100                                                  --

               90

Emcor Rust Test, Rating 0,0
Rust Preventive Properties, Rating 1
Oil Separation During Storage 5.0

Wheel Bearing Test Leakage, g, Max

Slump Test

5

Shall Be Free From Deposits

Four Ball Weld Load, kg, min 250
Timken ok Load, Lb, min 25
Water Content, % wt Nil

 

 

Our Clients

This is the easiest way to estimate a manufacturer's market reputation and credibility. Check out the list of clients that the manufacturer has worked with or continues to work. The more and larger companies that they have as clients, the better you can trust them. After all, weren't they good enough, big brands would not have worked with them in the first place.