Industrial Greases

LITHON EP 0 & EP 00

LITHON EP 0 & EP 00

INDUSTRIAL GREASES

Meets specifications :

LITHIUM soap based grease of NLGI 0 consistency. Product is fortified with antioxidants and EP additives

Application areas :

Recommended for lubrication requirements where NLGI 0 grade is recommended with EP properties. Product has good pumpability.

Special Features

LITHON EP series of lubricants are first quality, lithium soap greases suitable for lubricating various types of mechanical equipments. These are superior multipurpose greases, developed to meet the varied requirements of bearing manufacturers. They are water-resistant and are corrosion inhibited with excellent oxidation and mechanical stability.

Physico-chemical properties

  LITHON EP 0
Appearance Smooth And Uniform
Consistency of The Grease 355 - 385
@ 25± 0.5 ºC, 0.1 mm Units Worked, 60 X  
Corrosion, Copper Strip, @ 100ºC For 24 Hours Negative
Dropping Point, ºC >180
Four Ball Weld Load, kg, Min 200
Four Ball Wear Scar Dia, Max 0.50
Emc or Rust Test, Rating 0, 0
Timken ok Load, lb, min 45
Oxidation Stability @ 99± 0.5 ºC For 100 hrs 0.5
Drop In Pressure, kgf/cm2  
 
 
LITHON EP 00
NLGI Grade NLGI00
Appearance Smooth & Uniform
Colour Amber to light brown
Worked penetration at 25ºC± 0.5ºC  
a) 60 double stroke 400-430
b) After 100,000 strokes Shall not difer by more than 30 units from the values given above
Free organic acidity (as oleic acid), % by mass, max Value to be reported
Free alkalinity (as LiOH) % by mass, max Value to be reported. Preferred < 0.1
Drop point, ºC, min 160
Mineral oil extracted from the grease  
a) Kinematic viscosity in cst at 40ºC 135-165
b) Flash point ºC(COC), min 200
c) Viscosity Index, min 60
Cu strip corrosion at 100ºC, for 24 hrs Negative
Oxidation stability (100 HOURS), drop in pressure Kg/sq cm, max 0.7
Freedom from deleterious particles, permitted ,
No. of scratches, max
10
 
Timken OK load, kg, min 22
Four ball wear test, scar dia, mm, max 0.6
Four ball weld test, weld load, kg, min 250