Film Oils & Steel Mill Bearing Oils

Film Oils & Steel Mill Bearing Oils

HP STEEL 320, Industrial Gear Oil in Raipur

HP STEEL 320

BEARING OILS FOR STEEL PLANTS

Meets specifications :

HP STEEL Grades meet the requirements of bearing lubricant specified by MORGAN CONSTRUCTION CO., USA. These oils meet the performance requirements of IS: 6552-1987 and IPSS: 1-09-001-97

Application areas :

These oils are suitable for use in the Morgan Bearings of Steel Mills. Morgan Bearings are used in the Plate Mill, Wire Rod Mill, Merchant Mill, Blooming and Billet Mill, and Rail & Structural Mill. The oils are also recommended for those places where the bearings are under heavy load and in the presence of water.

Special Features

HP STEEL Grades are premium quality heavy duty bearing and circulating oil. They have high viscosity index with superior oxidation and thermal stability. They meet the requirement of high demulsibility, low foaming, excellent rust protection and good film strength property to minimize wear in roll-neck bearings of steel mills.

HP STEEL Grades are blended from high quality paraffinic base oils having a high chemical stability. The quality of the oil is further enhanced by the presence of selected grades of anti-oxidants, anti-rust, demulsifier and defoamants. These oils are suitable for use in bearings under critical conditions of exposure to water at high pressure and extreme load conditions. These products have good wettability and high film strength providing extra rust protection and eliminate scuffing and scoring of the bearing.

Physico-chemical properties

Appearance Bright & Clear
Acidity, Inorganic, mg KOH/g Nil
Acidity, Total, mg KOH/g <0.25
Carbon Residue,Conradson % Wt <0.20
Colour, ASTM <4.5
Copper Strip, Corrosion, At 100°C For 3 Hrs 1
Density @ 29.5°C, g/cc 0.894
Emulsion Characteristics At 82°C, In 20 Minutes, ml 40-37-3
Emulsion Characteristics, Water, ml 36
Flash Point, COC, °C >226

Foam Tendency/Stability, ml

Sequence I

Sequence II

Sequence III

 

30/Nil

0/Nil

30/Nil

FZG Rig Test (A/8.3/90), FLS >5
Pour Point, °C -6

Rusting Test

24 Hrs, Distilled Water

24 Hrs With Synthetic Sea Water

 

Pass

Pass

Kin. Viscosity @ 40°C, cSt 315-330
Kin. Viscosity @ 100°C, cSt 20.80
Viscosity Index >95
Four Ball Weld Load, kg >100
 

Cylinder Oil

General Purpose Machinery Oils

Machineway Oils

Open Gear Compounds

Pneumatic Tool Oils

Stenter Oils

Turbine Oils

Wire Rope Lubricants

Our Clientele

Our client list is the testimony of the service and support we provide.